2) REDUCTION GEAR (1) Causes of troubles and remedies The troubles and remedies of the reduction gear are shown here mainly. Therefore, in case of trouble, refer also to the hydraulic motor part.
① Reduction gear will not rotate Reduction gear will not rotate ② Temperature is too high ③ 7-26 Phenomenon Possible cause Remedy Hyd motor inlet pressu is sufficiently high ·Overload ·Damage of reduction gear re ·Negative brake is ON ·Reduce load ·Replace reduction gear ·Inspect brake release pressure ·Inspect brake pilot pressure ·Inspect brake parts Hyd motor inlet pressu is not sufficiently hig Rotation noise is heard hydraulic motor No rotation noise is he in hydraulic motor re h in ·Motor shaft breakage ·Damage of reduction gear ard ·Abnormality in pump, valve or so on ·Replace hydraulic motor ·Replace reduction gear ·Check for abnormality and remedy Phenomenon Possible cause Remedy Oil leakage through mating faces ·Careless omission to apply liquid packing ·Mating faces has slipped due to insufficient tightening or loosening of bolts ·Scratch on mating face ·Disassemble gear and re-apply it.
·Disassemble them, re-apply liquid packing and reassemble them as specified ·Replace parte Leakage around sha ·Oil seal is damaged ft ·Disassemble reduction gear and replace oil seal Phenomenon Possible cause Remedy Reduction gear casin temperature is too hig ·Gear oil is insufficient g h ·Grease is insufficient ·Gear, bearing or so on is damaged ·Check level and supply oil to specified level ·Supply grease ·Replace reduction gear