. MAINTENANCE MAINTENANCE PROCEDURE WARNING 4 - 37 REPLACE BREAKER CIRCUIT ADDITIONAL OIL FILTER ELEME (If equipped) Parts immedi engin is stopped and m ay cause s erious burns. Wait for the oil temperature t o go down before p erforming th Prepare a container t o catch the oil. 1. Place a c ontainer u nder the filte r eleme nt to c atch th e oil. 2. Remove plug (3) fro m filter case (1) an d drain the oil from the case. 3. Turn filte r case (1) to the l eft t o remove it , then take out element (2). Clean th 4. O-ring (4 5. When in cas conta holder, th en tighten a furthe r 1/2 turns.
NOTICE For details of the replacement interval for the element, see Fo r placemen "MAINTENANC E INTERVA L FOR HYDRAULIC BR EAKE R (PAGE 4-17) ".