. MAINTENANCE MAINTENANCE PROCEDURE 4 - 38 CLEAN PILOT LINE FILTER, REMOVE DIRT Prepare a c ontainer to catch drained fuel. 1. Place a container under the pilot l ine f ilter to catch the oil. 2. Remov e plug (1). 3. Remov e strainer ( 2) and was h it. 4. Replace O-ring (3 ) with new one. 5. Install th e washed strainer (2 ). Tightening torque for a strainer 8.83 to 9.81 Nm (0.9 t to 7.2 Fix two position s of the cy linder. 6. Install t he O-ring ( 3) and plug plug 10 8.0 to 147. 0 Nm (11 t o 15 kgm or 79.6 to 1 08.5 lbft)