Cab Heater and Air Conditioner, Valeo 83.00 Actuator Replacement Recirculation Actuator Replacement 1. Turn off the engine, apply the brakes, and chock the tires. 2. Remove the lower HVAC cover. For instructions, see Group 60 . 3. Disconnect the wiring harness from the recircula- tion actuator. See Fig. 1 . 4. Remove the tread plate cover. See Fig. 3 . 2 1 12/02/2003 f720395 1. Tread Plate Cover 2. A-Pillar Cover Fig. 3, A-Pillar and Tread Plate Covers 5. Remove the A-pillar cover. 6. Remove the capscrews that attach the actuator to the HVAC assembly and remove the actuator. 7. Using capscrews, install the actuator on the HVAC assembly.
Make sure that the actuator is correctly aligned on the door extension. 8. Attach the wiring harness to the recirculation ac- tuator. 9. Attach the A-pillar cover to the cab floor. 10. Attach the tread plate cover to the cab floor. 11. Attach the lower HVAC cover to the dash panel. For instructions, see Group 60 . 12. Remove the chocks from the tires. Business Class M2 Workshop Manual, Supplement 6, September 2004 150/2