daewoo Solar 420LC-V, Solar 470LC-V — Daewoo S0101000.FM — user manual

Service Standards for Replacing Worn Parts NOTE: When parts exceed the standard, replace them. When there is conspicuous surface damage, it is always safer to replace parts, whether standards are exceeded or not. Inspect O-rings and oil seals very carefully for cuts, nicks, brittleness, softness or any other type of damage or distortion, before final reassembly if any must be reused.

S0707260 Page 20 Swing Motor Item Standard Value mm (In) Replacement Limit mm (In) Remedy Clearance between cylinder bore and piston (D-d) 0.028 mm (0.0011 in) 0.058 mm (0.0023 in) Replace piston or cylinder Clearance between piston and shoe socket 0 mm (0 in) 0.30 mm (0.0118 in) Replace piston, shoe assembly parts Thickness of shoe (t) 5.5 mm (0.2166 in) 5.30 mm (0.2087 in) Replace piston, shoe assembly parts Height of push plate, round bushing assembly (H-h) 6.5 mm (0.256 in) 6.0 mm (0.236 in) Replace set; spherical bushing and retainer Thickness of friction plate 4.0 mm (0.157 in) 3.6 mm (0.142 in) Replace