SERDIA ERROR MEMORY 5. ERROR MEMORY 5.1 GENERAL The error memory lists the errors which have occurred since the memory was last cleared and which can be diagnosed. Se- lection of the menu point "Error memory" causes the current content of the error memory to be displayed. When errors have been eliminated, the relevant error messages in the "Error memory" window can be deleted: Have messages from the error memory displayed by actuating the "Read EM" button. Mark in the "Error location" window the indicated error location using the mouse (Example: "8112:(M17)Rack travel sensor"). The error location receives a gray background. Click on "Clear EM" button.
The error location is deleted, the message disappears. Quit the "Error memory" window with "Close". Figure: Example of an error memory output. DESCRIPTION OF THE FIELDS: Error location: List of error location: From this list you can select a single error location for more detailed information. Type of error: All data in this field of the list refer to the error location selected in the upper field. Environment data: Additional data (e.g. measured values) containing further information on the error location you have selected. Total number of errors: Total of all registered error locations. Frequency: Frequency of occurrence of the error location selected. Error status:
Selected error active or passive. EXPLANATION OF THE FUNCTION SWITCHES: Read EM: With this function switch you can retrieve the error memory from the ECU, and the display is updated. Clear EM: With this function switch you can send a command to the ECU to delete the error memory. 20-34