Deutz — 5.1 GENERAL

SERDIA ERROR MEMORY Defective sensors or pickups can be checked for their correct reference values with the help of the following table. It is recommended to use a multimeter as measurement aid. REFERENCE VALUES FOR SENSORS AND PICKUPS 1 Additional aid: power supply unit 20-38 Component DEUTZ part number Mode of measur- ment Ref. value for intact component Accelerator value pickup BOSCH 0419 9457 Resistor R ≅1kΩ total Accelerator value pickup Philips KMA20-30 DC voltage Hall-effect pickup, no mesu-red values available Speed sensor camshaft 0419 0811 Resistor ACvoltage. Inductivity R =310Ω V ≅40mV ACpeak L=140mH Oil pressure sensor KAVLICO 0419 9478 Resistor DC voltage1 Between pin 1 + 2:

R≅47kΩ i Between pin 1 + 3: R≅13kΩ i Between pin 3 + 2: R≅47kΩ i U =5V betr at 1083mbar U≅0,49V Charge air pr. sensor KAVLICO 0419 9552 Resistor DC voltage1 Between pin 1 + 2: R≅58kΩ i Between pin 1 + 3: R≅13kΩ i Between pin 3 + 2: R≅58kΩ i U =5V es at 1083mbar U≅1,083V Coolant temp, sensor BOSCH 0419 9333 Resistor R≅2,3kΩ a 21,5° C i Solenoid ETO Resistor R≅0,5Ω i Travel meas. system in EMR-positioner (Meas.coil=Pin 3 u. Pin 4) Resistor Inductivity R≅8Ω i L≅27mH stop position L≅6mH full throttle position Travel meas. system in EMR postioner (Meas.coil=Pin 3 u.

Pin 5) Resistor Inductivity R≅8Ω i L≅12mH constant Actuator in EMR positioner (Meas.coil=Pin 1 + Pin 2) Resistor Inductivity R≅1,3Ω L≅8mH