SERDIA WHAT SHOULD YOU DO IF...? ACTUATOR/ECU COMPATIBILITY Switch on ignition/power supply. Call SERDIA. In SERDIA, switch over to the menu "Parameters"->"Overall programming". Click on the button "Programming". The window "Open" will then appear. Select the engine data record stored in the memory ( .hex) by double clicking with the mouse. Transfer the engine data record to the EMR by clicking on the button "OK". Save the engine data record in the ECU by clicking on the button "Save in ECU". 3rd step: Start up the engine and check it is running satisfactorily. In the menu "Error memory", delete the error memory. 2. 20-55 ECU Part No. Software version No.
EMR Corresponding actuator, P/N What to do if the ECU fails 0211 1846 0211 1841 If you are replacing parts, this combination must be replaced in its entirety by the combination 0211 1911 /0211 1910. Please consult head office be- fore proceeding further. 0211 1910 0211 1911 Can only be replaced by P/N 0211 1918 0211 2017 1,08 0211 1926 For 101 2/1 01 3: replace with P/N 021 1 201 7 software version no. 1.11, identifiable by the housing no., from K 953 430. For 1015: replace with P/N 0422 61 78. 0211 2017 1.11 0211 1926 Cannot be replaced by different ECUs. It is essential to ensure that the hou- sing no. > K 953 430. 0211 2088 1.10 0211 1926 Only for DEUTZFAHR.