Deutz — RENEWAL AND TENSIONING

ALTERNATOR DRIVEBELT RENEWAL AND TENSIONING OF THE ALTERNATOR DRIVEBELT The drivebelt must be renewed at the first sign of wear. Check for fraying, cracks and separation of the belt plies. Some of the operations described below refer only to models equipped with front PTO and cab air condi- tioning. For machines not equipped with these items, these operations should be ignored. 1 1 Remove the battery cover and disconnect the nega- tive battery lead (--). 1 - Remove the side panels (1). 2 - Remove the air compressor and its drivebelt. (For de- tails see «REMOVAL OF THE AIR COMPRESSOR»). F0043830 3 - Loosen the tensioner block (2) and the nut (3) securing the compressor (4).

4 2 3 F0017300 4 - Unscrew the threaded rod (5) of the tensioner to slack- en off the fan drivebelt (6). Loosen the drivebelt sufficiently to be able to slip it off the compressor pulley. 6 5 F0017291 5 - Models with front PTO only: loosen and fully unscrew the six bolts (7) securing the flange of the cardan shaft (8). 6 - Detach the flange (9) from the flexible coupling (10). 7 10 8 9 F0017310 30-16