FRONT CARRIER REMOVAL OF THE FRONT CARRIER (Versions with front suspension) Before stopping the engine, deactivate the front sus- pension by pressing the relative button in the cab. Remove the battery cover and disconnect the nega- tive battery lead (–). 1 - Remove: the radiator/coolers assembly; the alternator and air conditioning compressor drivebelts; the reinforcing side members; the lift assembly; the front PTO (if present); the front suspension cylinders; the front axle and swinging support. (For details, see the corresponding headings). 2 - Loosen the bolts (1) to eliminate the tightening torque.
1 1 1 F0018340 3 - Attach lifting slings to the front carrier (2), attach the slings to a hoist and put them under slight tension. 4 - Remove the bolts (1) with their washers and remove the front carrier (2). If necessary, use a lever to separate the locating dowels from the engine. 2 2 F0045040 REFITTING THE FRONT CARRIER Refitting is the reverse of removal. 1 Bolts: 260 ± 10% Nm (191.6 ± 10% lb.ft.) 2 Locating dowels: grease 1 - Start the engine and operate the controls to expel air from the various systems. 30-114