Deutz — 4. Position sensor adjustment

LIFT POSITION SENSOR 4. Position sensor adjustment 1 - Detach any mounted implements from the 3-point linkage. 2 - With the engine stopped, raise the lift arms to their ma- ximum height using suitable lifting equipment. 1 A 3 - Make reference marks on the lever (1) and on the bear- ing support (2). 2 F0021420 4 - Lower the lift to its maximum depth position. 5 - Start the engine, push the external pushbutton (3) to rise the lift arms up to it stop. Hold the pushbutton (3) depressed and at the same time rotate the sensor (4) in clockwise.

3 F0021430 6 - As the sensor (4) is rotated, the lift will start to rise; top rotating the sensor and release the pushbutton (3) when the reference marks made in step 3 are apart a distance of “ D ” of 5–6 mm (0.20 - 0.24 in.). D 4 F0021440 7 - Fix the sensor (4) in position by tightening the screws (5). 4 5 F0020361 30-135