Deutz — 3. Renewal of the proximity sensor

CLUTCH PEDAL AND RELATED DEVICES 2. Adjustment of the clutch pedal position and travel 1 - Check that the distance between the top edge of the clutch pedal (1) and floor is the same as that of the brake pedals. If necessary, adjust the pedal height by adjusting the buffer (8). 1 8 F0019380 2 - Regolare il tampone (9) fino ad ottenere una corsa del pedale “ A ” di 155 5 mm (6.107 0.197 in.) NOTE With the EDS program in section 20, check that the voltage reaches a value of 0.9–1.1V. 0 + 0 + D000 5401 A 9 3. Renewal of the proximity sensor 1 - Unplug the connector (10). 2 - Unscrew the nut (11) sufficiently to disengage it from the sensor (12).

10 3 - Check that the axial play of the pedal is within the range of 0.1–0.6 mm (0.004 – 0.024 in.); if the play ex- ceeds the permitted maximum, adjust it before ad- justing the position sensor (12). 11 12 F0019360 4 - Fit the new sensor (12) following the removal proce- dure in reverse. Fully depress the clutch pedal. 4 - Adjust the position of the sensor relative to the lever by way of the adjuster nuts (11). Distance “ D ” between the lever and the sensor: 0,5–1 mm (0.02 – 0.04 in.) D 11 12 F0019370 30-162