RIGHT-HAND AIR CONDITIONING FAN REMOVAL OF THE RIGHT-HAND AIR CONDITIONING FAN Remove the battery cover and disconnect the nega- tive battery lead (–). 1 - Remove the seat. (For details, see «REMOVAL OF THE DRIVER'S SEAT»). 1 2 - Remove the centre console shroud. (For details, see «REMOVAL OF THE CENTRE CONSOLE AND SHROUD»). 2 3 - Remove the fixing screws of the right-hand console. (For details, see «REMOVAL OF THE RIGHT-HAND CONSOLE»). 4 - Remove the seat support (1) and upper cover (2) of the air conditioning assembly. F0021592 5 - Remove the evaporator. (For details, see «REMOVAL OF THE EVAPORATOR») 4 3 6 - Remove four bolts (3) securing the fan (4).
7 - Remove the fan (4) and turn it over. F000 1000 8 - Unplug the connectors (5) and (6). 7 1 If a new fan is to be fitted, the support block (7) should also be renewed. 4 5 6 F000 1010 REFITTING THE RIGHT-HAND AIR CONDITIONING FAN Refitting is the reverse of removal. 1 Stick the support block on to the fan screw before positioning the fan Block: Loctite 401 1 - Carefully check the seal around the upper cover. 30-181