Deutz — REFITTING

LEFT-HAND AIR CONDITIONING FAN REMOVAL OF THE LEFT-HAND AIR CONDITIONING FAN Remove the battery cover and disconnect the nega- tive battery lead (–). 1 - Remove the seat. (For details, see «REMOVAL OF THE DRIVER'S SEAT»). 6 2 - Remove the left-hand console without disconnecting the control cable of the heater valve. (For details, see «REMOVAL OF THE LEFT-HAND CONSOLE»). 7 3 - Remove the seat support (1) and the upper cover (2) of the air conditioning assembly 4 - Withdraw the evaporator. (For details, see «REMOV- AL OF THE EVAPORATOR). F0021590 5 - Remove the four screws (3) securing the fan (4). 6 - Remove the fan (4) and turn it over. 4 3 F000 1020 7 - Unplug the connectors (5) and (6).

7 1 If a new fan is to be fitted, the support block (7) should also be renewed. 4 5 6 F000 1030 REFITTING THE LEFT-HAND AIR CONDITIONING FAN Refitting is the reverse of removal. 1 Stick the block to the fan screw before positioning the fan. Block: Loctite 401 1 - Carefully check the seal around the upper cover. 30-182