SERDIA PARAMETERS 20-25 MK 3 TTG Parameter Unit Min. Max. typ Wert Description Page 11: Assignment inputs/measured values Ass (F18) Inp/PWM1 0 3999 1 (F18) Input: Digital / PWM 1 (PWM setpoint) Ass (F21) Inp/PWM2 0 3999 2 (F21) Input: Digital / PWM 2 (PWM setpoint alternate to F18) Ass (F24) AnaInp1 (Pedal) 0 3999 3511 (F24) Input: Analog 1 (accel.pr. sensor) Ass (M24) AnaInp2 (boostPr) 0 3999 3531 (M24) Input: Analog 2 (boost pr. sensor) Ass (M9) AnaInp3 (CoolTemp) 0 3999 3551 (M9) Input: Analog 3 (coolant temp. sensor) Ass (M21) AnaInp4 (OilPress) 0 3999 3541 (M21) Input: Analog 4 (oil pr. sensor) Ass (F20) DigAnaInp (H.thr.) 0 3999 3521 (F20) Input:
Digital / Analog (hand throttle) Monitoring delay 0 50 1 ON delay of input monitoring Page 12: Assignment switch inputs/functions Max. 5 inputs can be assigned to the total of 7 switch inputs. If the sign is changed, the switch positions (open/closed) are reversed. 1 = Input Digital / PWM 1 (Pin F18) 2 = Input Digital / PWM 2 (Pin F21) 3 = Input Digital (Pin F19) 4 = Input Digital / Analog (Pin F20) 5 = Input AnaInput4 (Pin M21) 6 = F3 is input (only for ECU 0211 2088) Example: AssInpTorque curve switching betw.1 / 2: Entry -3: At Input Pin F19 the torque curve can be switched: closed = torque curve 2 open = torque curve 1 Entry 3: At Input Pin F19 the torque curve can be switched:
closed = torque curve 1 open = torque curve 2 AssInp:torque curve 1 or 2 -5 5 3 Switching between two torque curves AssInp:speed droop 1 or 2 -5 5 2 Switching between two fixed speed droops AssInp:speed specificationi -5 5 1 Switching between two eng. speeds AssInp:governor type -5 5 4 Switching between two governor types AssInp:lower engine speed -5 5 0 Fixing lower eng. speed AssInp:upper engine speed -5 5 0 Fixing upper eng. speed AssInp:hold engine speed -5 5 0 Holding eng. speed AssInp:selector switch -5 5 5 Selector switch Page 13: Assignment outputs/measured values PWMfreq. for all inp/outp Hz 50 500 100 Ass (F16) Out/Dig/PWM/Freq -3999 3999 2000 (F16) Output:
Digital / PWM / Frequency (Eng. speed 1) Ass (F5) Out/Dig/PWM1 -3999 3999 2701 (F5) Output: Digital / PWM 1 (torque) Ass (F3) Out/Dig/PWM2 -3999 3999 3011 (F3) Output: Digital / PWM 2 (Warn.sign. KMT) Ass (M3) Out/Dig3/PWM3 -3999 3999 0 (M3) Output: Digital / PWM 3 Ass (F4) OutputDig1 -3999 3999 3200 (F4) Output: Digital 1 (error pilot light) Zuw (F15) OutputDig2 -3999 3999 3013 (F15) Output: Digital 2 (Warn.sign. oil pr.) Zuw (M2) OutputDig3 -3999 3999 3201 (M2) Output: Digital 3 (solenoid)