Maintenance—Every 500 Hours Change Engine Oil and Replace Filters 1. Run engine to warm oil. 2. Park machine on a level surface. 3. Stop engine. TX1002120A –UN–03JAN06 4. Remove 4 cap screws on the engine pan access cover to access the filters and engine oil pan. 5. Unscrew environmental drain cap (1) from bottom of engine oil pan, and install the environmental drain hose to allow oil to drain into a container. Dispose of waste oil properly. 650DLC Shown 6. Turn filter(s) (2) counterclockwise to remove. Clean mounting surface on base. 7. Apply thin film of oil to rubber gasket of new filter. T147484 –UN–01NOV01 8. Install new filter(s).
Turn filter clockwise by hand until gasket touches mounting surface. 9. Tighten filter 1/2—3/4 turn more. 10. Remove environmental drain hose, and install environmental drain cap. 1—Environmental Drain Cap 2—Filters Continued on next page DW90712,000001C –19–31OCT06–1/2 3-7-2 010609 PN=157