Maintenance—Every 500 Hours 9. Stop the engine. Remove the key from the key switch. 10. Pull the pilot control shutoff lever to the LOCK position. 11. Check the oil level gauge. Remove cover to add oil, if necessary. DW90712,0000020 –19–03JUL07–2/2 Grease Swing Bearing CAUTION: Prevent possible injury from unexpected machine movement if controls are moved by another person. Lubricating swing bearing and rotating the upperstructure must be done by one person. Before you lubricate swing bearing, clear the area of all persons. T140269 –UN–21MAR01 1. Park machine on a level surface. 2. Stop engine. 3. Lubricate swing bearing with 6 shots of grease at each of three grease fittings. 4.
Start engine. Raise bucket several inches off the ground, and turn upperstructure 45 degrees. 5. Repeat steps three times. NOTE: It is not necessary to start the engine the last time. DW90712,0000046 –19–23JAN06–1/1 3-7-9 010609 PN=164