John Deere 450DLC, 650DLC, and 850DLC Excavators — Installing Boom

Miscellaneous—Machine Assembly CAUTION: When aligning the center of the pin and pin hole, Do Not put fingers into the pin hole. When using a hammer, wear safety equipment such as safety glasses or a hard hat to protect against injury from flying pieces of metal. When inserting the pin, Do Not enter the area under the boom. 5. Lower boom into place and install pin. Install shims as required between the boom and main frame. DW90712,0000077 –19–03MAR06–2/3 6. Install plate (E) and cap screws (D). Tighten to 390 (288 lb-ft). Specification Boom Plate Cap Screw—Torque 400 ................................................. 290 lb-ft T122538 –UN–05AUG99 7. Lower the boom tip to the ground.

D—Cap Screw E—Plate DW90712,0000077 –19–03MAR06–3/3 4-5-8 010609 PN=251