Miscellaneous—Machine Assembly Connecting Hoses Between Boom and Machine CAUTION: Escaping oil under pressure can penetrate the skin causing serious injury. Avoid the hazard by relieving pressure before disconnecting hydraulic or other lines. Tighten all connections before applying pressure. X9811 –UN–08DEC08 Search for leaks with a piece of cardboard. Protect hands and body from high pressure oils. 1. Stop the engine. Place the pilot control lever in unlock position. Move the control levers back and forth, and right and left several times to release the remaining pressure in the hydraulic lines. 2.
Before connecting hoses between the boom and the machine, gradually loosen cap screws securing the covers to the ends of the hydraulic lines on the machine to release the trapped oil pressure in the lines. Remove the covers. 3. Connect four hoses between both the right and left boom lines and the machine. Continued on next page DW90712,0000083 –19–10FEB06–1/2 4-5-9 010609 PN=252