John Deere 450DLC, 650DLC, and 850DLC Excavators — Install Arm

Miscellaneous—Machine Assembly Install Arm CAUTION: Never allow anyone to enter into the area under the lifted arm (2). 1. Apply grease to boom (1), arm (2), and connecting pin (3). TX1003500 –UN–10FEB06 2. While slinging arm with a crane, align pin hole (4) of arm with that of boom. 450DLC—Specification Arm With Bucket Cylinder— Weight 2550 kg approximate ....................................................................... 5620 lb approximate 650DLC—Specification Arm With Bucket Cylinder— Weight 3930 kg approximate .......................................................................

8650 lb approximate TX1003502 –UN–10FEB06 850DLC—Specification Arm With Bucket Cylinder— Weight 4660 kg approximate ....................................................................... 10300 lb approximate 3. Install the plate between boom (5) and arm (6). Align the boom (1) bottom hole with the boss hole on the arm (2). Measure clearance (7). If clearance is 1 mm (0.04 in) or more, remove the shim (8) on the pin (9), and install it as illustrated. CAUTION: When aligning the centers of the pin and pin hole, DO NOT put fingers into the pin hole. When using a hammer, wear safety equipment such as safety glasses or a hard hat to protect against injury from flying pieces of metal.

When inserting the pin, DO NOT enter the area under the boom cylinder. TX1003501 –UN–10FEB06 4. Drive the pin into the arm and boom holes. 1—Boom 2—Arm 3—Connecting Pin 4—Pin Hole 5—Boom 6—Arm 7—Clearance 8—Shim 9—Pin 10—Pin Lock Plate 11—Bolts 5. Insert pin lock plate (10) with bolts (11). Specification Pin Lock Plate With Bolts— Torque 400 .......................................................................................... 290 lb-ft DW90712,000008B –19–03MAR06–1/1 4-5-12 010609 PN=255