Miscellaneous—Machine Assembly Connecting Arm Cylinder Rod 1. To prevent seals from damage, bleed the air from the arm cylinder according to the following procedures. a. Start engine. Run engine at slow speed. T122553 –UN–05AUG99 b. Lift arm cylinder (B) with a crane. Slowly extend and retract rod (A). c. Repeat operation in step (b) until cylinder rod moves smoothly. 2. Align rod-pin bore (C) of the arm cylinder with pin (D) on the arm by moving the arm cylinder up and down while extending or retracting the cylinder rod. 450DLC—Specification Arm Cylinder Rod End Pin— Weight 25 kg approximate ...........................................................................
54 lb approximate T122554 –UN–05AUG99 650DLC—Specification Arm Cylinder Rod End Pin— Weight 30 kg approximate ........................................................................... 66 lb approximate 850DLC—Specification Arm Cylinder Rod End Pin— Weight 38 kg approximate ........................................................................... 85 lb approximate A—Cylinder Rod B—Arm Cylinder C—Rod-Pin Bore D—Pin E—Pin Retaining Plate F—Cap Screw G—Adapter H—10 to 30 Degree Angle T122555 –UN–05AUG99 T122556 –UN–05AUG99 Continued on next page DW90712,000007A –19–09FEB06–1/2 4-5-13 010609 PN=256