John Deere 450DLC, 650DLC, and 850DLC Excavators — Connecting Arm Cylinder Rod

Miscellaneous—Machine Assembly CAUTION: When aligning the centers of the pin and pin hole, Do Not put fingers into the pin hole. When using a hammer, wear safety equipment such as safety glasses or a hard hat to protect against injury from flying pieces of metal. When inserting the pin, Do Not enter the area under the arm cylinder. 3. Install the pin into the pin bores, install pin retaining plate (E) with cap screws (F). Tighten to 400 (290 lb-ft). Specification Pin Retaining Plate Cap Screws—Torque 400 ........................................................................... 290 lb-ft 4.

When connecting the arm-cylinder-rod grease hose to the arm cylinder rod, install adapter (G) with angle (H) of 10 to 30 ° so that the hose does not come into contact with the arm cylinder mounting bracket. DW90712,000007A –19–09FEB06–2/2 4-5-14 010609 PN=257