Miscellaneous—Machine Assembly Connecting Bucket Cylinder Hoses CAUTION: Escaping oil under pressure can penetrate the skin causing serious injury. Avoid the hazard by relieving pressure before disconnecting hydraulic or other lines. Tighten all connections before applying pressure. X9811 –UN–08DEC08 Search for leaks with a piece of cardboard. Protect hands and body from high pressure oils. 1. Stop the engine. Place pilot control lever in unlock position. Move the control levers back and forth, and right and left several times to release the remaining pressure in the hydraulic line. 2.
Before connecting the bucket cylinder and the lines on the boom with the hoses, gradually loosen cap screws securing the covers to the ends of the hydraulic lines on the boom to release the trapped oil pressure in the lines. Remove the covers. 3. Connect two hoses between the hydraulic lines on the boom and bucket cylinder. DW90712,0000084 –19–10FEB06–1/2 4. To prevent seals from damage, bleed the air from the bucket cylinder according to the following procedure. a. Start engine. Run engine at slow idle speed. b. Slowly extend and retract cylinder rod (A). c. Repeat operation in step (b) until cylinder rod moves smoothly.
T122557 –UN–05AUG99 A—Cylinder Rod DW90712,0000084 –19–10FEB06–2/2 4-5-15 010609 PN=258