John Deere 450DLC, 650DLC, and 850DLC Excavators — Operational Checks—Key Switch ON, Engine ON Checks

4-6-21 010609 PN=285 Miscellaneous—Operational Checkout Dig Function Drift Check T6904AG –UN–06DEC88 Fill bucket with dirt. Position bucket at maximum reach with bucket pivot pin the same height as boom pivot pin. Retract arm cylinder, then extend about 2 inches Extend bucket cylinder then retract about 2 inches. Stop engine. Measure amount cylinders extend or retract in 5 minutes. Measure distance from bottom of bucket to ground. Compare measurements to specifications. 450DLC—Specification Boom Cylinder—Drift.............................................................................................. 15 mm 0..59 in.

Arm Cylinder—Drift................................................................................................ 20 mm 0.78 in. Bucket Cylinder—Drift............................................................................................ 20 mm 0.78 in. Bottom of Bucket-to-Ground—Drift...................................................................... 100 mm 3.9 in. 650DLC—Specification Boom Cylinder—Drift.............................................................................................. 10 mm 0.39 in. Arm Cylinder—Drift................................................................................................ 10 mm 0.39 in.

Bucket Cylinder—Drift............................................................................................ 16 mm 0.63 in. Bottom of Bucket-to-Ground—Drift...................................................................... 100 mm 3.9 in. 850DLC—Specification Boom Cylinder—Drift................................................................................................ 5 mm 0.2 in. Arm Cylinder—Drift................................................................................................ 18 mm 0.71 in. Bucket Cylinder—Drift............................................................................................ 27 mm 1.1 in.

Bottom of Bucket-to-Ground—Drift...................................................................... 150 mm 6.0 in. LOOK: Is cylinder drift within specification? YES: Go to next check. NO: See your authorized dealer. – – –1/1