John Deere 700H Crawler Dozer — Disassemble and Assemble to Turn Pins and Bushings and Not Lubricate

Track System 13. Smooth area of track link wear (A) using a grinder, if necessary. 01 0130 A—Track Link 48 T96289 –UN–27OCT88 CED,TX03399,5954 –19–24MAR00–5/11 14. Assemble track links using the following track press tool sets. NOTE: The pin end halves of master split link must be temporarily assembled to bushing end halves of link for proper positioning of plungers. Pin end halves will later have to be separated for installation at end of chain. T96273 –UN–27OCT88 15. Assemble master split link halves using master shoe bolts and washers (as required). Tighten bolts just enough to hold link together. 16. Install assembled split links on ram plungers. A—Bushing B—Saddle 17.

Install bushing (A) in front seat of saddle (B) so the mark is 180 ° opposite original location to expose a new wear surface. Continued on next page CED,TX03399,5954 –19–24MAR00–6/11 TM1859 (14JUL04) 01-0130-48 700H Crawler Dozer 071404 PN=98