John Deere 700H Crawler Dozer — Remove and Install

Removal and Installation 41. Assemble pumps using four cap screws (1). 1—Cap Screw (4 used) T118271B –UN–08JAN99 CED,TX03399,5973 –19–24MAR00–12/15 TM1859 (14JUL04) 03-0300-13 700H Crawler Dozer 071404 PN=157 42. Install hydraulic lines as shown. 43. Install hydrostatic pumps. –UN–17NOV98 Adjust chains as necessary when installing pumps to align dampener hub with dampener. T118254B Clean threads of flywheel housing cover plate cap screws. Apply cure primer and thread lock and sealer (medium strength) to threads of cap screws and install. Tighten cap screws to specifications.

Hydrostatic Pump—Specification Flywheel Housing Cover Plate— Torque............................................................................. 57 N•m (42 lb-ft) 44. Install rear pump mount bracket and tighten cap screws. 45. Remove lifting eyes from pumps and install fittings. Continued on next page CED,TX03399,5973 –19–24MAR00–13/15 03 0300 13