Hydrostatic System 44. Remove bearing cage link pin (A) and locator link (B). A—Cage Link Pin B—Locator Link RW25736 –UN–09JUN97 CED,OUTX547,110 –19–28JUN02–16/22 45. Remove the swashplate and piston assembly (A) through the housing side cover opening. 03 0360 14 IMPORTANT: Wear patterns develop between servo pistons and servo cylinders. Servo piston must be installed with original orientation. RW25737 –UN–20JUN97 RW25738 –UN–09JUN97 46. Tag or identify servo piston orientation to aid in proper assembly. 47. Remove the servo piston (C) and slider block (B). A—Swashplate and Piston Assembly B—Slider Block C—Servo Piston CED,OUTX547,110 –19–28JUN02–17/22 NOTE:
Do not stretch seal rings (B) any more than necessary when installing. 48. Replace expander O-ring (A) on each end of servo piston. 49. Install seal ring (B) over O-ring on each end of piston. RW25739 –UN–09JUN97 RW25740 –UN–09JUN97 A—O-Ring B—Seal Ring Continued on next page CED,OUTX547,110 –19–28JUN02–18/22 TM1859 (14JUL04) 03-0360-14 700H Crawler Dozer 071404 PN=204