Track System TM1859 (14JUL04) 01-0130-33 700H Crawler Dozer 071404 PN=83 CAUTION: Grease for track adjuster cylinder is under high pressure. Never remove special high pressure grease fitting (2) to release the grease. If grease does not escape immediately from vent hole (3), the check valve is open. Slowly –UN–19JUN00 drive machine forward and reverse until grease escapes; then close check valve nut. 4. Release track tension: T131684B a. Turn check valve nut (1) one to three turns counterclockwise to release grease through vent 1—Check Valve Nut hole (3). DO NOT loosen special grease fitting (2). 2—Grease Fitting 3—Vent Hole b. Tighten valve nut. CAUTION:
Track chain will fall to the ground when removing cap screws from shoe to separate master link. DO NOT stand at end of track. 5. Remove track shoe at master split link. (See Remove and Install Track Shoe in this group.) Continued on next page CED,TX03399,5951 –19–10NOV00–2/4 01 0130 33