Track System TM1859 (14JUL04) 01-0130-35 700H Crawler Dozer 071404 PN=85 Disassemble Lubricated Track Chain to Turn Bushings and Lubricate Chain NOTE: The following procedure is for disassembly of track chain to inspect, clean, replace damaged or worn parts, turn bushings, and lubricate chain again. If track chain is disassembled only to turn pins and bushings and no parts will be replaced. See Disassemble and Assemble Lubricated Track Chain to Turn Pins and Bushings and Not Lubricate, in this group. 1. Remove track shoes.(See Remove and Install Track Shoes in this group.) 2. Remove track chain. (See Remove and Install Track Chain in this group.) NOTE:
A clean track is necessary for proper disassembly. 3. Wash chain with high pressure water. It will not be necessary to wash links before reassembly if chain is thoroughly cleaned. 4. Use the following track press tool sets and saddle: • Tooling Set A2656-141 Continued on next page CED,TX03399,5952 –19–10NOV00–1/5 01 0130 35