John Deere 700H Crawler Dozer — Assemble to Turn Bushings and Lubricate Chain

Track System 22. As chain is being assembled, check to make sure there is some clearance between the overlapping face of links, using a feeler gauge. If links contact each other, check bushing projection. Lubricated Track—Specification Bushing Protection—Distance 3.02 ± 0.25 mm (0.199 ± 0.010 in.) .................. T96286 –UN–27OCT88 Continued on next page CED,TX03399,5953 –19–24MAR00–13/14 TM1859 (14JUL04) 01-0130-43 700H Crawler Dozer 071404 PN=93 19. After one complete joint has been assembled, check end play of track links to make sure bushing, thrust rings, and link counterbore faces are pressed solid against each other.

Position base of dial indicator on one link assembly and pointer against the other link assembly. 20. Pry link assemblies in one direction then in opposite direction to measure the amount of end play. End play must be zero. 21. As track chain is being further assembled, end play may be checked by flexing each joint after each link assembly is pressed together. End play is correct if links cannot be rotated by hand. –UN–27OCT88 T96285 CED,TX03399,5953 –19–24MAR00–12/14 01 0130 43