Disassemble and Assemble Lubricated Track Chain to Turn Pins and Bushings and Not Lubricate Track System NOTE: The following procedure is for disassembly of track chain only to turn pins and bushings. (Chain is not lubricated after assembly.) 01 0130 45 If this procedure does not apply to the repair job, see Disassemble Lubricated Track Chain to Turn Bushings and Lubricate Chain in this group. 1. Remove track shoes. (See Remove and Install Track Shoes in this group.) 2. Use the following track press tool sets: Tooling Set A2656-141 Continued on next page CED,TX03399,5954 –19–24MAR00–1/11 TM1859 (14JUL04) 01-0130-45 700H Crawler Dozer 071404 PN=95