Track System IMPORTANT: Track press disassembly tools must be in proper alignment with links to prevent broaching of pin and bushing. Damaged links cannot be reused. 01 0130 46 3. Check for proper alignment of tools with pin and bushing. T96266 –UN–27OCT88 4. Make an index mark on bushings and pins to aid in reassembly, when turning bushings 1/2 turn (180 ° ) to expose a new wear surface. CAUTION: Always wear safety glasses when operating the press. Parts may break or chip, which could create a risk of personal injury. A—Left Ram B—Saddle C—Right Ram D—Right Link E—Bushing F—Left Link G—Pin 5. Extend right ram (C) to push pin (G) and bushing (E) from the right link (D).
The right link is forced against the side of saddle (B) as the pin and bushing are pushed out. 6. Retract right ram. The right link, with seals and thrust ring, will stay on the ram tools. Continued on next page CED,TX03399,5954 –19–24MAR00–2/11 TM1859 (14JUL04) 01-0130-46 700H Crawler Dozer 071404 PN=96