Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE Always replace the slow blow fuse with a fuse of the same capacity. 1. Turn the starting switch to the OFF position. 4 - 37 REPLACE SLOW B NOTICE Always turn the power OFF when replacing the s low b low fus e (turn the starting switch to the 2. Remove the slow blow fuse box fro m the 3. Open covers (1), ( 2), and (3) of the slow blow fuse Covers (2) and (3) can be removed easil y by using p rotrusion (A) on the body a s a fulcrum and levering t he cat the cover with a flat-he aded screwdriver to r eleas 4. Loosen screws (4) and (5), and remove.

When screws (4) a nd (5) are removed, sl ow b low fu se (6) will also come off toge ther with electric wirin g (7) and (8 5. Using screws (4) a nd (5), install a ne w slo w blo w fus e together with electric wiring (7) and (8) to the slow blow fuse box, then close covers (1), ( 6. Install the slow blo w fuse box to the