Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE care not to damage the correctly to freely in of 4 - 67 11. Install turbin bushing portion of th e filter. If turbine assembly ( 6) is in stalle turbin rotate th direction 12. Replace O-ring (5), in stall h ousing (4) , then tighten knob (3) by hand. 13. Install clamp (2) and tighten it by 14. Check th e oil level in the en gine oil pan. 15. Start t he engine and check for oil leakage. 16. Check th at the oil is up to t he specified l evel. For details, see CHECK OIL LEVEL IN ENGINE OIL PAN, ADD OIL (PAGE 3-80).