Perkins — Perkins 1204F-E44TA and 1204F-E44TTA Industrial Engine Systems Operation Manual

UENR4490-01 87 Air Inlet and Exhaust System Air Inlet and Exhaust System Inspection of the Crankcase Breather i03965393 Air Inlet and Exhaust System - Inspect A general visual inspection should be made to the air inlet and exhaust system. Make sure that there are no signs of leaks in the system. There will be a reduction in the performance of the engine if there is a restriction in the air inlet system or the exhaust system. Hot engine components can cause injury from burns. Before performing maintenance on the en- gine, allow the engine and the components to cool.

Illustration 76 g02161629 Typical example (1) Separator (2) Valve mechanism cover (3) Breather tube Making contact with a running engine can cause burns from hot parts and can cause injury from rotating parts. When working on an engine that is running, avoid contact with hot parts and rotating parts. 1. Inspect the engine air cleaner inlet and ducting in order to ensure that the passageway is not blocked or collapsed. 2. Inspect the engine air cleaner element. Replace a dirty engine air cleaner element with a clean engine air cleaner element.

Refer to Operation and Maintenance Manual, “Engine Air Cleaner Element (Dual Element) - Clean/Replace” or Operation and Maintenance Manual, “Engine Air Cleaner Element (Single Element) - Replace” for the correct procedure. 3. Check for dirt tracks on the clean side of the engine air cleaner element. If dirt tracks are observed, contaminants are flowing past the engine air cleaner element and/or the seal for the engine air cleaner element.