12. OPERATION 12.11.2 ADJUSTING AMOUNT OF TILT (ANGLEDOZER ONLY) ment in a safe condition, then stop the engine and lock the work equipment securely with the safety lever. NOTICE The maximum amount of tilt is 400 mm. Be sure not to exceed 400 mm for the tilt. 1. Raise the blade 400 - 500 mm above the ground, then put blocks under the frame so that the blade does not come down. 2. Loosen set bolt 0 of the brace, insert a suitable bar into hole 0 of the brace, and turn it. Right tilt: Make right side shorter, left side longer Left tilt: Make left side shorter, right side longer 3. Tighten set bolt 0. 2-78