Komatsu — 24.6.1 CHANGE OIL IN POWER TRAIN CASE, CLEAN STRAINERS (POWER TRAIN STRAINER, SCAVENGING PUMP STRAINER)

24. SERVICE PROCEDURE 5. Remove all dirt from strainer 8, then wash in clean diesel oil or flushing oil. Clean the case interior and the removed parts. 6. Loosen mounting bolt 0 of the scavenging pump strainer, then remove cover 0. 7. Take out spring 0, then take out strainer @. 8. Remove all dirt from strainer 0, then wash in clean diesel oil or flushing oil. Clean the case interior and the removed parts. 9. Install the strainers to their original position. 10. After installing, replace the element in the power train oil filter. For details, see “24.4 EVERY 250 HOURS SERVICE”. 11. Refill the specified quantity of engine oil through oil filler 0. For details of the oil to use, see “20.

USE OF FUEL, COOL- ANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERA- TURE”. 12. Check that the oil is at the specified level. For details, see “24.2 CHECK BEFORE STARTING”. If the spring or strainer are damaged, replace them. 3-65