24. SERVICE PROCEDURE 24.6.2 CHANGE OIL IN FINAL DRIVE CASE chine has been operated. Wait for the oil to cool down I before starting the operation. I I Prepare the following. l l Container to catch drained oil: Min. 30 II capacity Refill capacity D65E, EX-12: each 24 R D65P, PX-12: each 27 R 1. Stop the machine so that drain plug 0 is directly at the bottom. 2. Remove oil level plug 0 and oil filler plug 0, then remove drain plugs 0 and 0, and drain the oil. After draining the oil, tighten the plugs. 3. Add engine oil to the specified level through the hole in oil filler plug 0. For details of the oil to use, see “20. USE OF FUEL, COOL- ANT AND LUBRICANTS ACCORDING TO AMBIENT TEM- PERATURE”.
4. Check that the oil is at the specified level. For details, see “24.4 EVERY 250 HOURS SERVICE”. 3-66