24. SERVICE PROCEDURE 24.6.3 CLEAN BREATHER Remove the breather and wash out dust remaining inside with diesel oil and flushing oil. 1. Power train (transmission) case breather (1 place) 24.6.4 GREASE UNIVERSAL JOINT Apply grease to arrows. the grease fittings (2 places) shown by Never try to open or close the cover when directly be- bolts 0, carry out the work from the rear below the cover so that you can easily get Remove the undercover at the bottom rear of the machine as follows. (1) Remove 2 bolts @ at the front of the machine. (2) Support the cover with your elbow while gradually remov- ing 2 bolts 0 at the rear of the machine. (3) Lower the cover gradually to open it.
+ Front of machine Dangerous place 118v8 3-67