hyundai — 8067024 pf2510 EN 03 17

Operating & maintenance manual 21.2.2 Hydraulic oil change Replace the hydraulic oil at intervals of 2000 operating hours or if another type of oil is to be used. Start the Diesel engine and let it run until the hydraulic oil has warmed up. Stop the Diesel engine and pull out the ignition key. Place an oil receptacle under the hydraulic tank. Unscrew the filler neck with the oil dipstick ( 1 ). Unscrew the oil drain plug, remove the oil dipstick and drain the hydraulic oil. Dispose of the waste oil in an environmentally friendly way. EU waste disposal key: 130202 (EU). Replace the oil filter cartridge, see description above. Screw in the oil drain plug with a new O-ring.

Add hydraulic oil via the filler neck. Start the Diesel engine and let it run until the hydraulic oil has warmed up. Stop the Diesel engine and pull out the ignition key. Check the hydraulic oil level again. 1 Fig. 111 Hydraulic oil 93 NOTICE • Take the compaction roller to a workshop in order to carry out the oil change. • Take the amount of hydraulic oil to be drained into account and be sure to choose a sufficiently dimensioned oil receptacle. • Be sure to exercise extreme cleanliness when filling in hydraulic oil! • Inform yourself of the type of hydraulic oil in the hydraulic system. Please refer to the Table of lubricants for the required specifications.

NOTICE Environmental protection! • The engine oil must not penetrate the ground, pollute water or leak into the sewer system. • Collect it in sufficiently dimensioned receptacles and dispose of it in an environmentally friendly way (EU waste disposal key 130202).