Operating & maintenance manual 21.4.3 Allocation of the fuses on the printed circuit board 21.5 Maintenance work referring to the ventilation system The filter units of the ventilation system need to be replaced at intervals of 500 operating hours or in the event of a high accumulation of dirt. Clean the ventilation slots by means of an industrial vacuum cleaner. Open the cover plate ( 2 ) of the filter unit and replace the filter unit. 2 Fig. 120 Ventilation system 98 No. Ampère Function No.
Ampère Function F1 30 Ignition lock F14 15 Connection for socket, engine speed sensor, connection compaction measurement (option) F2 7.5 Terminal 30 – Radio F15 10 Emergency stop, parking brake, drive control F3 25 Optional feature:
K08 F16 15 Drive control, accumulation of dirt (air filter), vibration, engine speed control, diesel control, ECO control (option), joystick, backup warner F4 25 Rear window defroster F17 150 Preheating F5 25 Optional feature A/C F19 7.5 Rear light (right), parking light (right) F6 7.5 Control lights H01, 02, 05, 09, F20 7.5 Rear light (left), parking light (left) 10, 11, 12, 13, 16, fuel gauge, D+ F7 7.5 Gearshift (or override F21 7.5 Low-beam light (right) function) axle, drum F8 15 Horn, control rear window F22 7.5 Low-beam light (left) defroster, radio, interior lighting, electrical equipment driver‘s seat F9 15 Front/rear wipers & F23 15 Lighting system (Optional feature) windscreen washer system F10 15 Rotating light (optional F24 30 Terminal 30:
Diesel control unit feature), front work lights F11 15 Rear work lights Rear work lights F100 80 Primary fuse for the electrical system of the vehicle F12 25 Fan (heating and ventilation) F13 7.5 Optional feature A/C, HCC water valve NOTICE Material damage! Never clean the ventilation slots with water jets or a high-pressure washer!