Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE Coolant density table Minimum Temp -50 64 -58 WARNING COOLANT is already diluted with distilled water, so it is not flammable. (For details of the distilled water, see 2. Open engine hood (1) and lock in position securely with the hood support lever. 3. Remove cover mounting bolts (3) (3 places), then remove battery inspection cover (2). 4 - 23 °C mp °F Above -10 -15 -20 -25 -30 -3 5 -40 -45 Above 14 5 -4 -13 -22 -3 1 -40 -49 30 36 41 46 50 5 4 58 61 COOLANT is toxic.

When open the drain valve, be c areful not to get If it gets in y our eyes, flush yo ur eyes with large am ount of fresh water a nd see a doctor When changi ng the coolant or when handling the co olant containing COOLANT that has b een drained during repair of radiator, please conta ct your Komatsu d istributor or request a specialist company to carry out the operation. COOLANT is to xic. Do not let it flow int o drainage ditche s or spray it onto the ground surface. "COOLANT A ND WATER FO R DILUTION (PAG E 4-5)"). Check th e density with Prepare a con tainer whose c apacity is larger tha n the specifie d coolant volume to catch drained coolant.

Prepare a hos e to supply anti freeze coolant and Prepare a c ontainer with a capacity of at least 11 liter (2.91 US gal) to catch th 1. Rotate the upper structure approx. 15° to the left, lower the work equipment co mpletely to the ground, then stop the engine For detail GETTING . s of the method of getting on or off the machine, see "USE HANDRAILS AND STEPS WHEN ON OR OFF MACHINE (PAGE 2-17)." ON OR OFF M ACHINE (PAGE 2 4. Remove c enter cover (4) and inspection cov