14 Method of cleaning the cooling system depends on its condition. G Ordinary condition G Extremely dirty coolant G Clogged radiator Cleaning using water Cleaning using Radipet 7 or equivalent. Drain the coolant. (Work procedure) Make a solution of FUSO Radiator Cleaner (Radipet 7 or equivalent) at a rate of 5 to 10% to the total volume of coolant. Fill the radiator with the solution. Keep the solution temperature at 90 ° C (194 ° F) and let the engine idle for 30 minutes. CAUTION Be sure to allow the engine to idle for 30 minutes only. Circulating the solution in the system for more than an hour might cause the system to breakdown. Drain the water and the solution.
Fill with soft water (boiled preferably). Keep the water temperature at 90 ° C (194 ° F) and let engine idle for 10 minutes. Drain the water. If the drained water is clear, cleaning has been successful. If it is still muddy, repeat the procedure. NOTE After cleaning with solution, fill with coolant as quickly as possible. To prevent freezing of the coolant and corrosion of the cooling system, use specified coolant solution of FUSO Diesel Long Life Coolant, FUSO Antifreeze or Radiator Antirust (Radipet 9). 14-7