Caterpillar — Caterpillar 99709-68120 — user manual

11 Cover the injection nozzle mounting hole B with a cloth C . Then, turn the engine over with the starter and check that no foreign matter adheres to the cloth. WARNING If any cylinder is cracked, coolant, engine oil, and fuel will enter the cylinder through the crack. When the engine is turned over, these substances will spray out of the nozzle mounting hole B at a high temperature. For safety, move away from the nozzle mounting hole before turning over the engine. 11735 Fit the Compression Gauge Adapter onto an injection nozzle mounting hole B together with a nozzle gasket. Then, connect the compression gauge 1 . Turn the engine over and measure the compression pressure.

Measure the compression pressure in every cylinder and determine the pressure differences between cylinders. If any compression pressure or cylinder-to-cylinder pressure difference exceeds the specified limit, pour a little engine oil into the cylinder via the injection nozzle mounting hole B then take the measurement again. If the compression pressure increases, there may be wear or damage on piston rings and inner surfaces of cylinders. If the compression pressure does not increase, valves may be seized or incorrectly seated, or the cylinder head gasket may be defective. 01939 11-9