Caterpillar — Caterpillar 99709-68120 — user manual

11 Connecting rod bearings [Installation] Install the connecting rod bearings 2, 4 by fitting the lugs A into their respective grooves. 4 2 CAUTION The upper connecting rod bearing has an oil hole B. The lower connecting rod bearing has no oil hole. Take care not to confuse the upper and lower parts. 01994 [Inspection] CAUTION Do not attempt to manually expand a connecting rod bearings 2, 4 if its span is insufficient. Upper and lower connecting rod bearings 2, 4 must be replaced as a set. 01995 (1) Span when free If the span is less than the specified requirement, replace the upper and lower connecting rod bearings 2, 4 as a set.

(2) Connecting rod bearing-to-crankshaft pin clearance If the connecting rod bearing-to-crankshaft pin clearance exceeds the specified limit, replace the defective part(s). 01995 01997 5 Installing piston and connecting rod assembly CAUTION Ensure that the piston ring gaps A remain in their correct positions. P.11-40 Take care not to damage the piston crown B (the area that forms part of the combustion chamber). Ensure that the connecting rod does not touch the oil jet C. 01985 11-31