Caterpillar — Caterpillar 99709-68120 — user manual

11 Piston pin-to-piston clearance If the clearance exceeds the specified limit, replace the defective part(s). 8 2 02016 Connecting rod bend and twist Fit the connecting rod bushing 3 and piston 2 in their respective positions of the connecting rod 4 . Measure the extent of bending A and twisting B in the connecting rod 4 . If either measurement exceeds the specified limit, replace the connecting rod 4 or rectify it. 4 C : Connecting rod 4 aligner (measurement device) 02039 NOTE Before mounting the connecting rod 4 on the connecting rod aligner C, install the upper and lower connecting rod bearings in their respective positions.

Measurements must be made with the connecting rod cap mounting nuts tightened to their specified torque. P.11-29 02040 11-39