44 7 Load handling – 7.9.1.7 Twistlocks 6 Check that the lock guide and lift pin can move freely. 7 Fit a pry bar between the lift pin (pos. 4) and the lock guide (pos. 5) and check the clearance max. clearance: 1–1.5 mm. 8 Turn the twistlocks to locked position and check lift pin wear. Change the lift pin if needed. Min. 70 mm Max. 4 mm 002311 Wear limits, lift pin. 9 Clean the area around the grease cup. 10 Grease the lift pins bearing with universal grease "EP2". 11 Repeat steps 1–10 on all four twistlocks. UDRF01.04GB Maintenance manual DRF 400–450