30 D Error codes – 1 Engine UDRF01.04GB Maintenance manual DRF 400–450 Descrip- tion Limitation Action Con- nec- tion and com- po- nent Diag- nostic menu Function group Code Cum- mins code 190/2 115 Electric mal- function rpm/ ignition posi- tion, no signal from any of the sensors. Engine stops and cannot be started. Check cabling between Control unit and compo- nent. Check component. D794/ Sen- sor:47, Sen- sor:50 - 1.9 Control system en- gine 191/0 349 Speed limita- tion activated. Speed is re- duced. - - - - 191/ 18 489 Speed warn- ing for low speed. Engine only runs at idle. - - - - 251/2 319 Internal error Control unit engine.
- - - - 11.5.3.10 Control unit engine 558/ 13 432 Electric mal- function sen- sor throttle pedal, idle switch cali- bration error. Engine only runs at idle. Check cabling between Control unit and compo- nent. Check component. - - 1.1.2 Throt- tle pedal 558/2 431 Electric mal- function sen- sor throttle pedal, idle switch data error. No limitation. Check cabling between Control unit and compo- nent. Check component. - - 1.1.2 Throt- tle pedal 558/4 551 Electric mal- function sen- sor throttle pedal, idle switch cable short- circuited to ground. Engine doesn't respond to throttle appli- cation. Check cabling between Control unit and compo- nent. Check component. - - 1.1.2 Throt- tle pedal