40 D Error codes – 2 Transmission UDRF01.04GB Maintenance manual DRF 400–450 Description Limitation Action Con- nec- tion and compo- nent Diag- nostic menu Function group Code Dan a code 20.62 20.62 Electric mal- function sensor oil pressure. Control unit acti- vates, Limp-home mode. Performs checks acc. to error code 50.xx. D793/A:2 - B253 TRANSM , menu 10 2.6.2 Sensor oil pressure 20.63 20.63 Electric mal- function sole- noid valve drive. Transmission in locked neutral po- sition (Shut-down mode). - D793/K2 - Y6066 TRANSM , menu 7 2.3.4 Valve block trans- mission con- trol 20.64 20.64 Electric mal- function sole- noid valve drive. Transmission in locked neutral po- sition (Shut-down mode).
- D793/K2 - Y6066 TRANSM , menu 7 2.3.4 Valve block trans- mission con- trol 20.65 20.65 Solenoid valve drive reacts too slow. Transmission in locked neutral po- sition (Shut-down mode). - D793/K2 - Y6066 TRANSM , menu 7 2.3.4 Valve block trans- mission con- trol 30.04 30.04 Low battery voltage. Control unit saves stored informa- tion to flash mem- ory and restarts to clear memory. Check cabling to control unit. Check alternator, battery and cabling between battery and alternator. - - 11.5.1.3 Igni- tion voltage (15) 30.05 30.05 High battery voltage. Control unit re- ceives reduced proportional con- trol precision de- pending on reduced PWM work cycle. Check voltage feed.
If auxiliary start equipment is con- nected, discon- nect it. - - 11.5.1.3 Igni- tion voltage (15) 31.00 31.00 Reference volt- age to sensors, ( 8V) is too low. Control unit re- ceives reduced sensor signals. Check voltage feed. Check control unit. - - 11.5.3.9 Con- trol unit trans- mission 31.01 31.01 Reference volt- age to sensors, ( 8V) is too high. Control unit re- ceives reduced sensor signals. Check voltage feed. Check control unit. - - 11.5.3.9 Con- trol unit trans- mission 40.06 40.06 Incorrect direc- tion from gear selector. Control unit locks transmission in neutral. Check cabling to gear selector with regards to forward and reverse signal. - - 2.1.1 Gear and multi-func- tion lever