Kaiyi UDRF01.04GB — Troubleshooting with error code, example

0 Complete machine – Complete machine 5 page Troubleshooting without an error code, example 1 Choose suitable section 0–12 to find the function and sub-func- tion that have caused the symptom. 2 Read function description for the function in question to get an overall understanding of which components are affected and how these interact 3 Use the function description and check the signals for the func- tion in question to find where in the function chain that signal or reaction is incorrect. 4 The fault is probably between the two units where the signal is failing. Start by checking the component that should send the signal.

5 If the component that is to send the signal seems to be correct, check transmission of the signal (electric wiring or hydraulic hoses). For electric cabling, see Troubleshooting cable harness page 7 . For hydraulic hoses, see Troubleshooting hydraulic hoses page 8 . 6 If the leads or hoses between the components seem in order, then check the component that receives the signal. page Troubleshooting with error code, example Error codes are strong indicators of malfunctions detected by the control system.

Many error codes are connected to electrical mal- functions but there are also error codes that interpret associations between one or several signals that indicate a non-electrical mal- function. It’s important to not draw conclusions too fast based on an error code. 1 Read out error code from the display, e.g., error code 34. 2 Use the error code lists and search information about the error code, see "Example of error code information in error code list" below. Error code lists are found in section D Error codes . For detailed instruction on reading out error code, see section D Error codes . 3 Follow instructions in field “Action”.

4 Use diagnostic menus and circuit diagrams to determine if the input signal to the control unit is correct, see section 8 Control system , group 8.4 Diagnostics as well as section E Schematics . UDRF01.04GB Maintenance manual DRF 400–450